SK120780 INDUSTRIES THOMAS PUMP Je Adams Steambrite Car Wash

Review INDUSTRIES THOMAS PUMP Je Adams Steambrite Car Wash Vacuum Compressor Rebuild Kit For

Introducing the Thomas Products SK120780 Je Adams 9855-1 Steambrite Car Wash Vacuum Compressor Rebuild Kit, specifically designed for the 1207pk80 model. This comprehensive rebuild kit is engineered to help extend the life of your car wash vacuum compressor, ensuring optimal performance and efficiency.

The kit includes a meticulously selected assortment of high-quality components. The pump assembly comprises a rebuild pump, inlet strainer, and outlet check valve, all engineered to deliver unparalleled suction power and durability. The compressor components consist of a rebuild compressor, crankshaft seal, piston seal, and valve plate, all designed to ensure efficient air compression and minimize leaks.

The Thomas Products SK120780 Je Adams 9855-1 Steambrite Car Wash Vacuum Compressor Rebuild Kit is also equipped with an oil filter, oil separator, and oil sight glass. The oil filter helps maintain the cleanliness of the compressor oil, while the oil separator and sight glass enable easy monitoring of the oil level and quality.

Moreover, this rebuild kit comes with various hardware pieces, such as bolts, nuts, and gaskets, ensuring a perfect fit and easy installation. The kit also includes an instruction manual, making the rebuild process straightforward and hassle-free.

In summary, the Thomas Products SK120780 Je Adams 9855-1 Steambrite Car Wash Vacuum Compressor Rebuild Kit is an essential tool for anyone looking to maintain or restore their car wash vacuum compressor to its peak condition. With top-tier components, easy installation, and comprehensive instructions, this rebuild kit is a worthwhile investment for car washing enthusiasts and professionals alike.

The Thomas Products SK120780 and the Adams 9855-1 Steambrite car wash vacuum compressor are both popular models in the car wash industry. If you're considering a rebuild kit (such as the one from Thomas with part number 1207pk80) for your existing compressor, here are some pros and cons to help you make an informed decision:

1. Cost-effective: A rebuild kit is typically less expensive than purchasing a new compressor. If your compressor still works but just needs some parts replaced, a rebuild kit could save you money.

2. Easy installation: Rebuild kits come with all the necessary parts to repair your compressor. Installation is usually a straightforward process that can be done with common hand tools.

3. OEM parts: Using OEM (original equipment manufacturer) parts in your compressor rebuild ensures that you're using high-quality components designed specifically for your machine.

4. Longer compressor lifespan: By regularly maintaining and rebuilding your compressor, you can extend its lifespan and save money in the long run.

1. Time-consuming: Rebuilding a compressor can take several hours, depending on the complexity of the repair and your experience level.

2. Requires technical knowledge: Rebuilding a compressor involves disassembling, inspecting, and replacing various parts. Some knowledge of compressor systems is necessary to ensure a successful repair.

3. Potential for error: If not done correctly, a compressor rebuild could result in damage to other components or an ineffective repair.

4. Availability of parts: In some cases, specific parts for older models or hard-to-find components may be challenging to source, which could delay the rebuild process.

A rebuild kit for your Thomas SK120780 or Adams 9855-1 Steambrite car wash vacuum compressor can be a cost-effective and long-lasting solution if your compressor is in need of repair. However, it does require some time, technical knowledge, and patience. If you're unsure about your ability to complete the rebuild yourself, consider hiring a professional or purchasing a new compressor.

If you're confident in your technical abilities and have the time to dedicate to the rebuild process, a Thomas Products 1207pk80 rebuild kit could save you money and extend the lifespan of your compressor. Make sure to follow the instructions carefully and use high-quality components for the best results. If you're unsure or don't have the time, it may be worth considering a new compressor or hiring a professional for the repair.

Details:

Install the fan onto eccentric nib. Does not include the compressor. The eccentric should run parallel to the housing ribs. Drop the new rod and sleeve assembly through top of compressor housing with head clamping screw to right as viewed open end.

Note: it may be necessary to insert a flat tip screwdriver into the slot in base of connecting rod, and spread slightly, order break lactate bond free it from bearing. Clean the inside of head with a soft clean cloth. Do not over tighten, or bearing damage/connecting rod breakage may result. Replace new filter in the holder and snap cap back into place.

Install the new gasket, seating it firmly in groove with your finger or blunt object. Remove the head gasket o-ring and discard. Fits all 1207PK80 model Thomas compressors. Caution to avoid property damage or personal injury, always try rotating the fan by hand prior to connecting unit power source.

Align the front face of connecting rod with bearing. Make sure the top edge of cylinder sleeve locates in o-ring groove bottom valve plate. Do not tighten. Remove the old gasket from head.

Make sure that the wires are clear of fan. Clean the top of plate with a clean soft cloth. Recommend for service every 2 years. Remove the filter cap from assembly.

Place the head on top of valve plate. Install the new intake flapper valve. Turn the valve plate over. Remove the two restraints and four exhaust flapper valves two over each port from top of valve plate.

Slide the dust shield onto rod. Remove the valve keeper and intake flapper from bottom of plate. These include the piston cups, seals and head gaskets if needed of compressor. Tools the following tools are used in the maintenance and overhaul procedures.

Install the new flapper valves and screws as shown in. Insert the hex key into hole in right side of compressor housing. If the eccentric is misaligned do not continue installing rebuild kit, as premature rod or sleeve failure may result. Slide the sleeve down until it contacts housing.

Place cover and capacitor assembly off to side leaving it connected the lead wires. Make sure the lead wires are attached as shown. Clean the old adhesive from connecting rod bearing mounted on eccentric. Kit is compatible with standard Thomas 1207 80 stroke model's.

Slide the connecting rod off bearing, lift it out through top of compressor housing. Rebuild and assembly note look down through the top of housing, and spin eccentric by hand. If the connecting rod cannot be properly aligned, contact nearest service center. To avoid frequent repairs follow the recommended assembly procedures.

Clean the bottom of plate with a clean soft cloth. This is a feature of the womb-l piston. Set valve plate assembly aside. Remove the valve plate o-ring and discard.

Locate the dust shield by lining up locator slots of on ribs housing. With the sleeve located and firmly seated on housing, replace valve plate as shown in. Assemble the front cover to housing so that capacitor is vertical with leads on top. New Pump rebuild kit.

If you don't feel suction, or if hear a thump as turn the fan, do not connect the unit to a power source; review assembly procedure for possible error. Slip the rod onto bearing. The valve keeper should be placed on top of the flapper so that word up is visible. Remove and discard old filter.

Clean loose dirt from the outside of compressor. Note: it may be helpful to insert the hex key through hole in housing, and into set screw eccentric. If it rocks from front to rear, the connecting rod is misaligned on eccentric. Caution: improper assembly or use of damaged parts may lead to premature failure.

Hold the sleeve down against housing with one hand, and slowly rotate eccentric other hand. Install the new o-ring into bottom of valve plate assembly, seating it firmly groove with your finger or blunt object. After rebuilding these will normally last up to 10,000 -15,000 hours before the cup seal needs be replaced again. Check for suction at the air inlet port by placing your finger over as you turn fan.

Thomas service kit. You should feel a slight suction with each rotation of the fan. Thousands of kits available - new Pumps. Loosen clamping screw at the base of connecting rod.

As the piston travels up and down it will also rock from side. When properly assembled the fan will remain centered in housing when rotated by hand. Note: before you begin, read these instructions thoroughly and assemble the necessary tools. Insert the screw and washer into threaded hole in nib.

This will prevent the eccentric from rotating while tightening fan screw.

specifications compressorshow:

• brand: Industries Thomas Pump
• mpn: Sk120780
• model: 1207pk80
• part type: Wash Vacuum Compressor
• motor horsepower: 3/4
• compressor type: Piston
• custom bundle: No
• country of origin: United States
• power supply: Electric

returns compressorshow:

• policy: no returns

payments compressorshow:

• credit card: visa
• other
• wallet: apple-pay

offer compressorshow:

• availability: in stock
• started: january 20, 2026
• prices: $92.90–$429.99
• item condition: New
• sold #: 11
• in stock #: 5
• options: ship-to-home

general compressorshow:

• category: Business & Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Blowers > Air Compressors

seller compressorshow:

• rating: 98.4%
• # reviews: 5589
• city: mckinney, texas

shipping compressorshow:

• transit: 3-7 days
• carrier: fedex
• type: fixed
• service: economy, fedex 2day, overnight
• class: economy, expedited, one-day