LS100-30H SULLAIR Air Compressor Airterk Dryer

Review SULLAIR New Air Compressor Airterk Dryer Never Installed

The Sullair LS100-30H/LS100-30HP air compressor with Airterk LP series dryer is a powerful and efficient solution for industrial compressed air needs. This compressor system, featuring a Sullair LS100-30HP reciprocating air compressor paired with an Airterk LP30 HE series refrigerant dryer, provides high-quality, dry air for various applications.

The Sullair LS100-30HP compressor boasts impressive performance, delivering a constant flow rate of 110.3 cfm at 100 psig and a maximum pressure of 150 psi. Its large, oil-lubricated piston design ensures durability and reliability, while robust features such as a cast iron cylinder, heavy-duty crankshaft, and external oil cooler contribute to the compressor's exceptional efficiency and output.

The Lor quote air aftercooler is standard on this compressor, lowering the intake temperature before it reaches the dryer. This design improvement maintains compressor performance, increasing cooler efficiency and prolonging the lifespan of the compressor as well as the dryer's refrigerant.

The Airterk LP30 HE series refrigerant dryer is a crucial accompanying component that removes moisture and contaminants before the compressed air is released. This dryer reduces the moisture content to a dewpoint of -40 degrees Fahrenheit (-40 degrees Celsius) and features a variable pressure dew point control. The Airterk LP series dryer also incorporates a non-glycol desiccant for easy waste oil disposal.

The Sullair LS100-30H/LS100-30HP air compressor system with Airterk LP series dryer is constructed with operator safety and ease-of-use in mind. Featuring a large accessory cabinet with swing doors and multiple gauge ports, this compressor system is easy to monitor and maintain. Moreover, its self-diagnostic capabilities enable quick identification and resolution of any issues.

In conclusion, the Sullair LS100-30H/LS100-30HP air compressor system equipped with an Airterk LP30 HE series refrigerant dryer is a robust and reliable solution for your industrial compressed air needs. Its impressive performance, efficient design, and user-friendly features make it a top choice for various applications.

A Comparative Analysis of Sullair LS110-30H and LS110-30HP Air Compressors with AIRterk Dryer

Sullair LS110-30H and LS110-30HP are two industrial-grade air compressors from Sullair's weathertight series. Both models feature a rotary screw design, offering high-pressure air for various applications. However, the primary difference is in their cooling systems: LS110-30H uses an air-to-air aftercooler while LS110-30HP features an oil-cooled aftercooler. In this analysis, we will discuss the pros and cons of both models when used with an AIRterk dryer for air quality enhancement.

1. Energy-efficient: This model features an air-to-air aftercooler, which cools the compressed air using outside air, requiring minimal electricity.

2. Quiet operation: The air-to-air aftercooler runs on a fan, keeping the compressor's critical components cooler and reducing the overall noise level.

3. Maintenance-friendly: As the aftercooler is external to the compressor, it is more accessible for routine maintenance and servicing.

4. Cost-effective: With an air-to-air aftercooler, the energy requirements are lower, and the unit is typically less expensive than the oil-cooled alternative.

1. Cooling efficiency: Although air-to-air aftercoolers effectively remove moisture when the outside temperature is cooler, they may struggle during hot climates or peak loads when temperatures rise significantly.

2. Moisture tolerance: The indirect cooling method might not eliminate all moisture from the compressed air stream before it reaches the dryer, possibly affecting the dryer's performance or degrading its life over time.

1. Higher cooling capacity: Oil-cooled aftercoolers are more effective at removing moisture and maintaining lower temperatures, typically resulting in drier compressed air.

2. Simplified design: As the aftercooler is integrated into the compressor, the overall system has fewer components, requiring less daily maintenance and ease of operation.

3. Suitability for extreme temperatures: Oil-cooled aftercoolers are better suited for applications in extremely hot or cold conditions where temperature management is crucial.

1. Complexity and maintenance: The integration of the oil-cooled aftercooler into the compressor makes routine servicing more complicated. The oil-lubricated system requires regular oil changes, filter changes, and routine inspections.

2. Higher energy consumption: Compared to the air-to-air aftercooled model, the oil-cooled aftercooler requires significantly more electricity due to the oil circulation system and the compressor's larger size.

Both Sullair LS110-30H and LS110-30HP air compressors have their unique advantages and disadvantages when paired with an AIRterk dryer. The choice between the two ultimately depends on your specific application requirements, climate conditions, and operational priorities.

For low to moderate moisture applications or where energy efficiency and maintenance friendliness are essential, the Sullair LS110-30H with an air-to-air aftercooler may be the best fit. However, if you're in a demanding environment with excess moisture or require optimum dryness in your compressed air stream, the oil-cooled aftercooler in the Sullair LS110-30HP might be a superior choice.

Consider the operational factors such as moisture levels, climate conditions, energy usage, and servicing requirements for your specific application when selecting between the Sullair LS110-30H and LS110-30HP air compressors with an AIRterk dryer. Based on your evaluation, choose the compressor that suits your requirements best.

Details:

New Sullair LS100-30H/a air compressor with airterk dryer. Airterk air dryer.

specifications compressorshow:

• brand: Sullair
• mpn: Ls100-30h
• model: Ls100-30h/a
• part type: Compressor
• power supply: Electric

payments compressorshow:

• other
• wallet: google-pay
• credit card: visa

returns compressorshow:

• policy: no returns

seller compressorshow:

• # reviews: 22
• city: san antonio, texas
• rating: 100.0%

general compressorshow:

• category: Business & Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Blowers > Air Compressors

offer compressorshow:

• availability: in stock
• sold #: 24
• options: ship-to-home
• best offers: true
• prices: $360.01–$3299.99
• item condition:
  • New – Open box
  • New
  • Used
• started: january 30, 2025
• in stock #: 5

shipping compressorshow: